Connect the camera to power via USB. Wait 30 seconds for the LED to flash slowly.
If the LED is not flashing red/blue, hold the reset button for 5 seconds. zclever security camera manual
Open the app. Tap Sign Up or Register . Use a valid email address. You will receive a verification code. Enter it and create a strong password. Connect the camera to power via USB
: Ensure DHCP is enabled in the DVR network settings so it automatically receives an IP address from your router. zclever security camera manual
If you are locked out or setting up for the first time, try these standard defaults: admin Password: Leave it blank (default) or try 123456 .
Connect the camera to power via USB. Wait 30 seconds for the LED to flash slowly.
If the LED is not flashing red/blue, hold the reset button for 5 seconds.
Open the app. Tap Sign Up or Register . Use a valid email address. You will receive a verification code. Enter it and create a strong password.
: Ensure DHCP is enabled in the DVR network settings so it automatically receives an IP address from your router.
If you are locked out or setting up for the first time, try these standard defaults: admin Password: Leave it blank (default) or try 123456 .