| Component | Example / Notes | |-----------|----------------| | | Thunderbolt is easier; M.2 gives better performance but no hot-plug | | Desktop GPU | Any PCIe card (e.g., GTX 1060, RTX 3060) | | eGPU adapter | e.g., ADT-Link R43SG (M.2 to PCIe) or Thunderbolt to PCIe enclosure board | | Power supply (PSU) | Standard ATX or DC-ATX (GPU needs 6/8-pin power) | | DIY mounting | Open test bench, acrylic sheet, or 3D-printed case | | Short M.2 extension cable (if using M.2) | To route out of laptop chassis |
Unfortunately, I couldn't find a specific download link labeled "135" related to DIY eGPU setups. However, I can guide you to some popular resources: diy egpu setup 135 link download
Creating a system image or recovery point before starting is highly recommended. Go to the NVIDIA or AMD website
Once Windows recognizes the "Standard VGA Adapter" in Device Manager, you need the official drivers. Go to the NVIDIA or AMD website. Setup 1
) and your laptop is refusing to use the card due to resource errors.
Most laptops have a "BIOS whitelist" or "Large Memory" requirements that prevent them from recognizing an external card. Setup 1.35 acts as a pre-boot environment that: Forces the laptop to "see" the GPU.