Elias turned back to Xentry. The interface looked the same, but the logic behind it was now wide open. He navigated to the "Control Unit Adaptations."

Sending a software command through the Multiplexer (such as the VCI C6 or SD Connect C4 ) to trick the vehicle's CAN bus into thinking the ignition is engaged.

Mercedes Trucks (Actros, Axor, Atego) and older buses use a 14-pin round diagnostic connector, not OBDII.

file within the Xentry directory, which the software then reads as a real ignition state. Common Use Cases PassThru Setups

Xentry Ignition Enabler is a specialized utility tool used primarily by Mercedes-Benz technicians and DIY enthusiasts who use Xentry Passthru software with generic J2534 adapters (like OpenPort 2.0 or Chipsoft). Purpose and Function

The enabler does not bypass the vehicle's security to start the engine. It only bypasses the diagnostic software's requirement.