Installation must be performed by professional fitters following these primary steps: Preliminary Checks:
The Probo PR70 is powered by a 24V DC motor with a 230V AC mains supply. Up to Maximum Door Width: 5.0 meters. Thrust: 650 N. Operating Temperature: -20∘Cnegative 20 raised to the composed with power C +70∘Cpositive 70 raised to the composed with power C Mechanical Assembly | Interval | Task | |----------|------|
Adjust force levels using the and '+' or '-' keys. Mechanical Assembly | Interval | Task | |----------|------|
For sectional doors, maintain a minimum vertical distance of 40 mm from the ceiling and between 10 and 65 mm from the operator runner. 2. Mechanical Assembly Mechanical Assembly | Interval | Task | |----------|------|
| Interval | Task | |----------|------| | Weekly | Check for leaks, listen for abnormal sound. | | Monthly | Clean pre‑filter housing; inspect O‑ring. | | Quarterly | Test dry‑run protection (close inlet valve briefly). | | Yearly | Replace sediment cartridge. Check pressure tank air charge. | | 2 years | Replace shaft seal kit (if dripping from weep hole). |