Start with P-20 = 5.0, P-21 = 0.5s, P-22 = 0.1s. Then use the auto-tune function P-99 – the controller will test the actuator and set optimal values.
Connect the CAN bus and power leads according to the attached wiring diagrams. If the device is at the end of a line, ensure the terminating resistor is plugged in. Erhardt-leimer Do 3001 Manual
Before we dissect the manual, we must understand the machine. The is a derivative of the famous DO 3000 series—a compact, high-precision digital edge controller used to guide moving webs (materials like foil, fabric, or rubber) so they run perfectly straight. Start with P-20 = 5
To maintain and repair the Erhardt-Leimer Do 3001: If the device is at the end of
The Erhardt+Leimer is a digital command station used to control web guiding systems. While a single direct "story" for this specific model doesn't exist, its role in industrial automation centers on precision and efficiency in manufacturing. LIMEX-TECHNIK s.r.o. Device Overview
Connect the unit to the E+L controller using a CAN bus, ensuring the terminating resistor is plugged in if necessary.