The Txshs is intended for the regulation of fluids and gases within the pressure and temperature limits specified in Section 4 (Technical Specifications). Any use outside these parameters is considered improper and voids the warranty.
Commonly Referenced Operations (Omitted or Unclear in Manuals) Gemel Txshs User Manual
If you are transporting the bike (e.g., on a ferry or trailer), press Button 1 twice within 10 seconds of arming. The indicators will flash three times to confirm the motion sensor is off while the ignition-kill remains active. 2. System States & Indicators Activation Delay: After arming, the system takes approximately 15 seconds The Txshs is intended for the regulation of
A single or dual-button interface for arming/disarming security systems. The indicators will flash three times to confirm
Every Gemel Txshs must be linked to a Gemel Cloud account or an on-premise LAPS server.
Press and hold simultaneously for about 10 seconds until the LED stops flashing.