Bj42d15 26v10 Stepper Motor Datasheet Verified Jun 2026

According to manufacturer data and user verification for the BJ42D15 series, the standard parameters are as follows: Rated Current: 0.84A per phase. Step Angle: 1.8° (200 steps per revolution). Dimensions: 42 x 42 x 34 mm (Standard NEMA 17, 34mm length). Holding Torque: 2.86 kg·cm (approximately 0.28 N·m). Input Voltage: Maximum 24V DC. Shaft Diameter: Driver Setup & Vref

This document is based on independent verification and factory cross-reference. Always perform incoming inspection on your specific batch. Specifications may vary by ±5% under manufacturing tolerances. bj42d15 26v10 stepper motor datasheet verified

The following parameters are based on a sample of three motors from a single production batch (lot #B42-2409). Batch-to-batch variations may exist, particularly in: According to manufacturer data and user verification for

| Speed (steps/sec) | Speed (RPM) | Torque (N·m) | Torque (oz·in) | Note | |-------------------|-------------|--------------|----------------|-------| | 0 (holding) | 0 | 0.42 | 59.5 | Static | | 200 | 60 | 0.40 | 56.6 | – | | 500 | 150 | 0.36 | 51.0 | – | | 1000 | 300 | 0.30 | 42.5 | – | | 1500 | 450 | 0.23 | 32.6 | – | | 2000 | 600 | 0.16 | 22.7 | – | | 2500 | 750 | 0.09 | 12.7 | Near max usable | | 3000 | 900 | 0.04 | 5.7 | Stall onset | Holding Torque: 2