Lighthouse-tx-htc-2-0-calibration-rescue-244.bin Free -

| Symptom | Likely cause | Next step | |---------|--------------|------------| | Red light, motors spin then stop | Motor controller firmware mismatch | Flash an official 2.0 firmware from another healthy unit (extracted via USB). | | No USB enumeration, constant red LED | Bootloader corrupted | Hardware recovery via ST‑Link V2 (solder to SWD pads on PCB). | | Green LED but no tracking | Laser photodiode failure | The rescue cannot fix broken hardware. Replace the base station. |

Locate the necessary files in your SteamVR installation directory, typically found at: lighthouse-tx-htc-2-0-calibration-rescue-244.bin

Release the button once your PC detects a new removable drive named CRP DISABLD Apply the Rescue Firmware Open the "CRP DISABLD" drive and delete the existing firmware.bin lighthouse-tx-htc-2-0-calibration-rescue-244.bin file into the drive. | Symptom | Likely cause | Next step

This software fix will not work if the issue is a physical motor or laser failure. If you hear no motor sound or the red light persists after this fix, the unit likely needs a professional replacement . Replace the base station

Article last updated: October 2025. This file is not endorsed by HTC or Valve. Use at your own risk.